Кажется умы хакеров после покорения подписей и HV для запуска игр взялись за новую высоту, теперь их миссия вернуть Linux на наши с вами ps3. Теперь в гонку включился ещё и Kmeaw.

Цитата из IRC:
kmeaw: it is gentoo
kmeaw: marcan’s rootfs
stuntcock: does your linux install have access to gameos from within linux and also to all spus?
kmeaw: no
kmeaw: it doesn’t need usb stick
kmeaw: linux has access to all spus
kmeaw: gentoo is running from my laptop’s hdd
kmeaw: but if you change your kernel parameters then you can install it on ps3′s hdd like marcan did
Lush: is this a different approach than graf_chokolo?
kmeaw: i don’t change VFLASH
GraFfiX: kmeaw:does X launch?
kmeaw: haven’t tried yet but I think of a reason why it shouldn’t
kmeaw: Xfbdev will definitely work
kmeaw: in this video ps3 boots gentoo from the network via nfs
kmeaw: laptop’s harddrive partition is exported using nfs kernel server
GraFfiX: is nfs efficient?
GraFfiX: like speed-wise
kmeaw: yes, i have a home NAS exported via nfs
kmeaw: works faster for me than samba
kmeaw: there are no full support for rsx yet
kmeaw: s/are/is/
GraFfiX: kmeaw:do you see any reason why xbmc would not run when we have full rsx?
stuntcock: someone has to code a driver for the video
stuntcock: right
kmeaw: no
kmeaw: when we have full rsx support in linux drivers, then everything should work
Текст не переводил намеренно, чтобы не искажать смысл.

А вот и видео работы:

А вот и инструкция как всё сделать самим, правда прийдётся повозиться с FTP и большую часть работы помоему делает PC.

Оригинал:
ubuntu-desktop% sudo apt-get install dhcp3-server tftpd-hpa nfs-kernel-server

marcansoft.com/transf/gentoo-ps3-20101020.tar.bz2 = rootfs
www.multiupload.com/E8IQAO2PB3 = kernel image and modules

extract rootfs into /mnt/experimental:
% sudo mkdir -p /mnt/experimental
% sudo tar -C /mnt/experimental -xvpf /path/to/gentoo-ps3-20101020.tar.bz2

then copy 2.6.36-rc7-01073-g47a9595-dirty from ps3linux.tar.gz into /mnt/experimental/lib/modules.

Set up the DHCP server. Put this in /etc/dhcp3/dhcpd.conf:

option domain-name “example.org”;
option domain-name-servers 8.8.8.8, 8.8.4.4;
default-lease-time 600;
max-lease-time 7200;
ddns-update-style none;
authoritative;
log-facility local7;
subnet 192.168.2.0 netmask 255.255.255.0 {
range 192.168.2.128 192.168.2.250;
}
next-server 192.168.2.1;
filename “kboot.conf”;
option routers 192.168.2.1;

Set up your wired network interface (eth0) to have a static IP address “192.168.2.1″.

Copy vmlinux file into /var/lib/tftpboot.

add this line to /etc/exports (requires root privs):

/mnt/experimental 192.168.0.0/16(rw,async,no_root_squash,no_subtree_check,anonuid=0,anongid=0)

Then everything is done. Let’s start up the services:

% sudo service tftpd-hpa restart
% sudo service dhcp3-server restart
% sudo service nfs-kernel-server restart

Create a kboot.conf file in /var/lib/tftpboot with this line inside:

linux=’vmlinux video=ps3fb:mode:2 root=/dev/nfs rw ip=dhcp nfsroot=192.168.2.1:/mnt/experimental panic=5′

That’s all. Run Linux from lv2patcher v9 and see if it boots.

И что качать:
[Download AsbestOS] www.multiupload.com/Z7AAQA6HF9
[Download Kmeaw LV2 Patcher v9] www.multiupload.com/29OFIBQO1C
[Download Gentoo PS3 (Marcan)] marcansoft.com/transf/gentoo-ps3-20101020.tar.bz2
[Download PS3 Kernal Images/Modules] www.multiupload.com/E8IQAO2PB3